New and Original ARM MCU STM32F103ZDT6 STM32F103 STM32F LQFP-144 microcontroller Stock IC chips

Introduction to STM32F103ZDT6

The STM32F103ZDT6 is a high-performance microcontroller from STMicroelectronics. It is part of the STM32F1 series and is built on a 32-bit ARM Cortex-M3 core. The microcontroller offers a wide range of features and peripherals, making it suitable for a variety of applications, including industrial control, consumer electronics, and motor control.

Features

The STM32F103ZDT6 microcontroller offers a wide range of features, including:

• 32-bit ARM Cortex-M3 core running at up to 72 MHz
• 512 KB Flash memory and 64 KB SRAM
• Multiple communication interfaces, including USB OTG FS, CAN, and I2C
• Multiple timers and PWM channels
• Low-power modes for energy-efficient operation

Peripherals

The STM32F103ZDT6 microcontroller offers a range of peripherals, including:

• USB OTG FS: The microcontroller features a full-speed (FS) USB OTG interface. The FS interface supports up to 12 Mbps operation and is compliant with USB 2.0.
• CAN interface: The microcontroller features a CAN interface that supports both CAN 2.0A and CAN 2.0B protocols. The interface supports up to 1 Mbps operation and features advanced filtering and error detection capabilities.
• I2C interface: The microcontroller features two I2C interfaces that support standard, fast, and high-speed modes. The interfaces support both master and slave modes and feature advanced filtering and error detection capabilities.
• ADC: The microcontroller features a 12-bit ADC with up to 16 channels and a 1 MSPS conversion rate. The ADC supports both single-ended and differential inputs and features advanced sampling and trigger capabilities.
• Timers and PWM channels: The microcontroller features multiple timers and PWM channels, including 3 general-purpose timers, 2 advanced-control timers, and 2 basic timers. The timers support a wide range of modes and features, including PWM, input capture, and output compare.

Development Tools

The STM32F103ZDT6 microcontroller is supported by a range of development tools, including:

• STM32CubeMX: A graphical tool that allows developers to configure the microcontroller and generate initialization code.
• STM32CubeIDE: An integrated development environment (IDE) that provides a complete development environment for the microcontroller, including code editing, compilation, and debugging.
• STM32 Nucleo-144 board: A development board that features the STM32F103ZDT6 microcontroller and provides access to all the microcontroller's peripherals.

Specifications

The following table provides an overview of the key specifications for the STM32F103ZDT6 microcontroller:

Conclusion

The STM32F103ZDT6 microcontroller is a high-performance microcontroller that offers a range of features and peripherals suitable for a wide range of applications. Its 32-bit ARM Cortex-M3 core, combined with its advanced peripherals and low-power modes, make it suitable for a wide range of applications, including industrial control, consumer electronics, and motor control. With support from a range of development tools, including STM32CubeMX and STM32CubeIDE, developers can quickly and easily get started with the microcontroller and take advantage of its full capabilities.